- Best Water Softeners of 2020 – The Winners!
- Top Rated Water Softener Review & Comparision Chart
- #1. Recommendation: Fleck 5600SXT Water Softener Review
- #2. Watts RV PRO-1000 Portable Water Softener
- #3. Waterboss 220 Water Softener (22000 Grains)
- #4. Eddy Electronic Water Descaler – Alternative
- #5. Nuvo H2O DPHB Water Softener System
- #6. The Aquios Full House Water Softener & Filter
- #7. On The Go OTG4-DBLSOFT-Portable RV Water Softener
- #8. Aquasana EQ-SS20 SimplySoft Water Softener
- #9. Morton M30 System Saver Water Softener
- #10. Scalewatcher Nano Electric Descaler – Alternative
- Ultimate Water Softener Buyers Guide
- What is a Water Softener?
- What is Hard Water?
- How to Test for Hard Water?
- How Does it Work?
- Do I Need?
- Find What Size Softener Do You Need?
- Softeners Vs. Filtration Systems
- Types of Water Softeners
- The Choice Between Portable and Standard
- What Kind of Water Softener Do I Need?
- Brands List
- The Price and Size
- Common Problems & Solutions
- Tips of Maintenance to Keeping it Healthy
I am not very familiar with the internet world, but I do know everything about water issues and especially water softeners. In 2017-2020, I have spent over 2100 hours on installing Water Treatment & Purification Systems in the USA and Canada. I came across 29 different water softeners and tested them. Most of them sucked but few selected were perfect for home.
I tried to find some of the honest and latest reviews of top rated water softeners. I failed, and at that point, I decided to prepare this list of my recommendations based on experiences with different water treatment systems in 2020.
Best Water Softeners of 2020 – The Winners!
Experts’ Choice: Fleck 5600SXT Water Softener
You should go with Fleck 5600SXT, which is a beast for home. The Meter based regeneration ensures that the working cost remains low. It is easy to install & you can do it without plumber’s help too. This is one of the best water softener available in the market.
Best Buy – Iron Pro 2 Water Softener
If your water contains iron along with other contaminants, you should select Iron Pro 2 for home. It is a combination of water softener and filter which ensures a healthy life of your family. This is a perfect value-for-money model for anyone.
You can find the below quick comparison very helpful as it showcases all products, their features, & specification in a single table only. Here, You can compare price, ratings, & other relevant features of water softeners easily.
Top Rated Water Softener Review & Comparision Chart
We thought to help you out by thoroughly understanding each product and their description. So here we are with the major Water Softener reviews, which will help you in choosing the best system for your family.
#1. Recommendation: Fleck 5600SXT Water Softener Review
Under the brand of Fleck, the Fleck 5600SXT was released and it tops in the list of reviews. This one is best suited for a medium size family. This device has got a digital display which comes along with other distinctive feature, which makes the assembling part easy for its users.
This Fleck 5600SXT is a salt based system, which means that it requires the regeneration process to take place. The Fleck 5600SXT has some automated mechanisms inbuilt which make the transformation process less complicated one.
For the purpose of water softening, this machine is considered one of the best available in the market now. There are also chances that you may not even complain about the product, because of its effective way of softening liquid.
It has an awesome capacity of grain handling, which points up to 48000 in numbers. Now you may feel that the regeneration part needs some work by us, which is false. The manufacturers have designed the machine in such a way that there is less maintenance of it.
This machine uses a digital meter kind of mechanism, you need to simply enter the number on the screen and there will be only the work of replacing the water softener salt mass frequently.
This is the proven best softeners and you can actually see that on Amazon Reviews where Fleck 5600SXT is best-rated products. This is suitable for the family of 3 to 6 members only. Do choose wisely for your family. When you purchase this machine, you will receive two things. First the computer-based water softener review and a big brine solution tank, therefore you will need a drain and a normal 120-volt power supply to get started with this. Before water softener installation, make sure that you have chosen the right place. Make sure that you have arranged almost 3.1 feet * 19 inches for the installation.
If the automatic regeneration facility is your priority, choose Fleck Water Softener only. Find the following list we have made after a detailed research and various tests performed by us.
#2. Watts RV PRO-1000 Portable Water Softener
Do you need the water softener which works in a more portable way? That means something that can be taken along with you when you on a trip or camping place. If you are searching for such a system, this one is the right choice for you.
RV means for recreational vehicles, so by the name itself you might get the idea about its use. This is exclusively made for helping you with the availability of soft solution even while you are during your traveling time.
Read our detailed review on GE Water Softening system
As Watts RV Pro-1000 (10,000 Grains) has got this portability feature, it would not be suitable to use it for home purpose. Therefore, automatic salt recharge facility is not there.
Customized flow valve feature lets the regeneration of salts, with or without the need of connecting it to the main system. There is a cradle shaped design to carry the system. This helps in maintaining the needed stability and gives good support while handling the water softener on the move.
Know the comparison and difference – Water Conditioner vs Water Softener
It has got an incredible capacity of taking 4.5 gallons of the solution as input. This machine weighs about 25 pounds and is having the dimensions as 22 x 9.5 in feet. It has got a warranty of ten years.
Watts RV PRO-1000 is the best suite for an avid traveller. If you live in Motorhome or travel & camp in RV and facing the problem of intensive hard water, Watts RV PRO-1000 is the best option for you.
#3. Waterboss 220 Water Softener (22000 Grains)
The best water softeners which are small in size but performs equally good, Waterboss 220 is an example of that. Waterboss 220 is one of the top water softener gadgets, which is having a suitable size out of all the systems in the market right now.
The system is a salt-based water softener system, therefore, it offers you the best solution for softening of hard liquid though it is having a miniature shape.
The Design of Waterboss 220 is compact. It is so small in look, that it would not look like water softener system. We all are aware of the loud sound that a system makes during the run of the machine. But this one appreciates user’s free time and does its work silently.
Know the complete process: How does a Water Softener Work
The time taken for the process of regeneration is only about 19 minutes. It doesn’t have an external filter instead it has an internal filter, thus saving the maintenance cost. It has got easy to handle display screen and can be simply set up by the user.
The features of Waterboss 220 makes it supreme. The compact look with low regeneration time makes it perfect for a family of 4 leaving in City area and using municipally-supplied water. We can say that this product ranks first in the list of Best Waterboss systems.
#4. Eddy Electronic Water Descaler – Alternative
If you have been doing a lot of research on water softeners, then you definitely would have come across this famous softener’s name Eddy Electronic Water Descaler. This can be used instead of your usual water softeners. This system performs the same function but in a different way.
Also read other Top Picks: Water Softener for Well Water
This gadget uses the magnetic field to fight the hard water. In this, the elements causing the buildups are not completely removed. Instead, they are suspended in it, making soft water available for almost 2 days.
Check out our review on Northstar Water Softener
Eddy Electronic Water Descaler uses Magnets for softening. Magnets are used in the water flowing pipes, and thus, the metals causing the buildup are not removed instead they are suspended using it. The dimension of this machine in inches is 6.6 x 1.5 x 3.4 and the weight is approx two pounds.
Eddy Electronic Water Descaler is a 120 volts system which works on an approx of 5 watts. All the money will be paid if the user is not satisfied with the water softener within a time period of 1 year. Warranty of a lifetime in case of any repair and anything related to replacement.
If you are not facing any hard water problem and don’t want the headache of Salt and Filters then this is the best solution for your needs. This uses 5 watts of power only which is amazing.
#5. Nuvo H2O DPHB Water Softener System
This is a salt free water softener, which has been used more nowadays as it does not require any amount of salt. Therefore, your liquid is also not infected.
The expert’s reviews for Nuvo H2O DPHB have been positive and negative altogether. That means, this machine has been found suitable for some, while some people were disappointed with it. Therefore, check out the specs of this device, if it satisfies your needs then go for it!
It is a salt-free water softener system and uses the mechanism of nanotechnology. It has an approx. of 60100 gallons of volume. The very suitable size of 8.5” in width and 29.5” in length, which helps in arranging the machine in small areas region too.
It has got a lifetime warranty period and there is a cashback facility within a period of 2 months of use. Designed for homes which are 2200 sq.feet and more in the area.
NuvoH2O is best for the users who don’t have very hard water at their premises. This is recommended to homeowners only as they don’t have very hard water to begin with. This is a salt-free system which means a reduced amount of sodium in your drinking water. No need to store Salt alike other Water Softeners.
#6. The Aquios Full House Water Softener & Filter
Many people have been using it for softening water but maybe it is not preferred by most of us. Also, chances that the slippery kind of water is not suiting you well, and if you use less quantity of salt and the water is just not apt for you.
There has been a rise in the number of salt-free water softeners users at this time, and this Aquios Full House is one of the best among them.
This can be used for softening as well as filter the hard minerals from water. As it uses a salt-free water softener mechanism, a new method is implemented that helps in removing the hard particles.
One extra layer of the carbon filter is used, which filters out more particles after the water has been softened. This feature is not found in most of the available products. Suitable size, with the filtration process taking place inside the system itself and so only one tank is needed in the whole process.
This system does not need the power to run it.
If the hardness of water found in your house is average and you want salt free water softener which also works as filter and without electricity then this is the best water softening device for you.
#7. On The Go OTG4-DBLSOFT-Portable RV Water Softener
Similar functionalities found in this previously discussed Watts RV Pro which had this portability quality in it.
As the name says, On the Go Water Softener means, you can carry it wherever you want. One of the largest portable water softeners available.
The shape of the On The Go OTG4-DBLSOFT-Portable RV system is a bit different. But this design makes it more efficient as it delivers more 41% of softened water than any other portable water softener system gives. The regeneration time taken by the system is almost 31 minutes and you just need two boxes of salt to get started with.
It has a good capacity of 16500 grains handling. Measurement dimensions go like 22” height x 9.5” diametrically. Salts that can be used for regeneration is Table salt or any other softener salt.
If you are the one who moves frequently from one place to another, and wants large capacity water softener with less regeneration time then this is the made for you only.
#8. Aquasana EQ-SS20 SimplySoft Water Softener
This machine uses a salt-free water softener system. The technology used here is called as SLOW Phos which helps in providing no artificial conditioning of the liquid and results in less corrosion of the pipes as we don’t use salt for the process. This makes the Aquasana EQ-SS20 SimplySoft environment-friendly and is one of the best water softener available.
Here for softening of the water, we actually change the charge of the ion of the hard elements in water. Thus, the charge attraction is reduced and thus, lumps of the minerals are not created on the pipe surfaces.
The model number is EQ-SS20. The overall weight of this system is 13.2 pounds. The dimensions of the machine in inches is 15 x 6 x 24. The temperature of the machine ranges from 41 to 91 degrees in Fahrenheit.
The flow rate in this machine is seven gallons per minute. Warranty period is of 1 year.
If you want to keep the environment clean and want all the features of best softener then this is the best available choice. SLOW PHOS salt-free water softening technology is used in this system. You will also get quality output, less maintenance, and no transformation process.
#9. Morton M30 System Saver Water Softener
This one is the most favored system released by the manufacturing company Morton. This was included in the most hit water softeners reviews last year. This machine is a beast out of all the available top most softeners, with a huge 34K grain capacity for removing the hardness of the water.
Morton M30 System Saver is bit heavy and big in size, still, these points don’t much matter looking the flow rates of this water softener.
The dimensions of the machine are 5 x 5 x 5 inch. This machine weighs almost 95 lbs and has a look-ahead utility which lets the best softening unit to learn more about the pattern of the incoming water and the usage.
Morton M30 System Saver has this feature of regeneration on the basis of demand placed by the user. This process removes the hard materials from solution. A guide of instructions comes along with the machine, which is easily understandable and followed.
Some Best Picks Reviewed: Morton Water Softener
It is cost effective as it uses almost half of salt compared to other systems. This will be appropriate, if you have a big family then 30,000-grain capacity.
#10. Scalewatcher Nano Electric Descaler – Alternative
This water electric descaler is considered to be the best that comes just after the traditional system. The Best water softener that runs in this kind of categories is not much credited by people. But we will definitely let you know about the specifications, and also the Pros-Cons of the machine.
Scalewatcher Nano Electric Descaler has a good ability to fight with the hard minerals present in the solution and give you a good result. The main use of power is made in this unit. The electric signals are used, and they are sent constantly through the solution to make some alterations in the ability of the hard elements to get attached to the lining surface of the pipes.
While this technology can also be used for removing the build ups formed on the pipe surface. Thus keeping your pipelines clean and healthy to use.
The model number for this device is given as Nano itself. The overall weight of the machine is 3.9 ounces. The dimensions are given as 5 x 1.6 x 2.9 in inches.
The source needed for power is DC/AC switching power supply which is Underwriter’s Laboratories(UL) approved ones only. It should be used for indoor use only, works perfectly for water supply of municipality. Batteries are not required for this machine.
Those who have hard water problem and still wants to be worry free about salt and filter can go for this amazing Nano Electric Descaler.
Ultimate Water Softener Buyers Guide
Among all the listed Products, we would like to select the Fleck 5600SXT 48,000 Grain as our best pick at this time. These reviews showed that it is found to installed in many homes, mainly because of two reasons; the surprising specs and the cost being a within-the-budget type.
|1||Fleck 5600SXT||48,000||9.5/10||Meter Based Regeneration, Digital Control Head, Durable tank|
|2||Watts RV PRO-1000||10,000||9.2/10||Low Regeneration, Cost Friendly|
|3||On The Go OTG4-DBLSOFT-Portable RV||16,000||9/10||Avoid the buildup of scale, prevent formation of stains, improve the taste of water & remove the odor.|
|4||Waterboss 220||22,000||9/10||additional sediment and dirt filters|
|5||Aquasana EQ-SS20 SimplySoft||50,000||8.5/10||Salf-Free, Stand Alone Softener|
|6||Nuvo H2O DPHB System||60,000||8.5/10||salt-free|
|7||The Aquios Full House Water Filter & Softener||40,000||8.5/10||Salt-Free, All-In-One system that conditions, filters, eliminates scale|
|8||Morton Salt MSD34C System Saver||30,000||8.5/10||Small Size, Whole house water softener|
|9||Eddy Electronic Water Descaler||Electronic Descaler||8.5/10||Small Size, Environment-friendly, 12 Month Money Back Guarantee|
|10||Scalewatcher Nano Electric Descaler||Electronic Descaler||8.5/10||Compact, Environment-friendly,|
The consumers will compare all the features that are present in all the available softeners, and choose this one as it stands out from the crowd for its technical details itself. It has got this electric based power-head which acts as the deciding factor in terms of system efficiency.
The other reason as mentioned earlier is the cost of the product. The manufacturer of Fleck water softeners has always tried to build machines which are of good quality and a reasonable cost. The financial situation in the country has been that much good, so looking into that, it is easy to understand that people will always prefer this economical solution only.
If you are wishing to buy this model, check out the Amazon website, type in the model name and get the chance to read the impartial reviews of the customers who have used it personally. You can also check other forums on the web regarding the various products manufactured by Fleck. Most of the details provided on such websites will be the first-hand information shared by the company officials itself.
It is important for you to know the quality of the water you are using for the routine purpose at home. If you like to keep the diluent less polluted, with a significantly minimal amount of chemicals, the best way is to use the water softening systems.
What is a Water Softener?
It is a machine that is used for home-purpose. In this, transferring of ions take place so that we could clean the mixture by the complete removal of hard matters that is present in the diluent used in the home. These hard matters include mainly calcium and magnesium which comes from the underground.
The continuous use of such a hard mixture causes many visible damages. Some of them are white formations found on the surface of the utensils, the lathering of soaps are not proper, some unusual coatings on the dishes, the clothes that are washed become dreary very fast.
Normally the best water softener machine has two tanks in the internal of it. One tank is the liquid tank, and the other one is the brine tank. One tank is present with beads of resin which has an opposite charge compared to that of the calcium and magnesium ions. So when water flows inside the system, some exchange of ions occurs which converts the hard minerals in the fluid to the soft ones. The soft materials can be potassium or sodium chloride which needed to be added for further regeneration. When you are dealing with a Potassium Chloride Water Softener, potassium chloride is used instead of the sodium chloride.
What is Hard Water?
Hard water is that kind of water which contains a huge amount of dissolved minerals especially magnesium and calcium. Almost 80% of the damages caused by the home materials is because of such hard fluid.
Now how the fluid becomes hard will be your obvious doubt. The rainwater is in the pure form. When it falls on the ground and mixes with the sand and the rock particles which include chalk, lime and mainly the two materials mentioned in the previous section. Now some people prefer drinking hard mixture compared to a soft mixture, as it has got more mineral content. But again the question arises why then we need it.
These hard water adversely affects our home materials which include pipes, cooking vessels, cloth material. It leaves some patches on the surface with which it comes in contact. The units used for knowing the level of hardness in water is PPM(Parts per million) and also GPG(Grains per gallon). If these units range between 3.6 to 10.2 in GPG counts, we can say that the solution is very hard. You must keep in mind the meaning of Hard Water and its adverse effects while choosing water softening systems for you and your dear ones.
How to Test for Hard Water?
There are many ways in which you can check whether the solution is hard or not. While taking a shower, if you find that the soap mixture is not creating the right amount of foam. If you feel the water used in unit being considerably less smooth on the skin, you will get the right evaluation that the mixture is hard. Another home method could be, to fill a plastic bottle half way around with the water.
Then add the soap solution into it, shake the bottle for some time. If you see that the mixture is mixed with soap very well, then the liquid is not hard. Otherwise, if the solution is not foamy with mainly the soap particles floating on the surface, the liquid is indeed hard. You can adopt the same technique to check top water softener also.
If you see that the mixture is mixed with soap very well, then the liquid is not hard. Otherwise, if the solution is not foamy with mainly the soap particles floating on the surface, the liquid is indeed hard. You can adopt the same technique to check leading water softener also.
Using scientific ways, you can test the hardness of the mixture using testing kits that are available specifically for this matter. The plumbing people say that the hardness of the solution can cause a massive damage financially. Initially, you may not see much difference caused by the hard water but it this issue is not addressed at the right time, it can cost a lot of money to the users.
This hard solution can cause damage to the drainage system which will ultimately damage your appliances like the washing machines, which are using the same solution. So it is of extreme importance to decide which product you will buy.
How Does it Work?
We all are now well aware of what is a hard mixture, how it is identified, and now the main concept comes into the picture. They are used to soften the solution but how it is done, will see that in this section. Hard water can be identified by the texture of the solution when it comes in contact with the soap material.
Now, in this, the main section is the mineral tank. There is an arrangement of polystyrene beads which carry the negative charge. The hard water which enters the water softening system containing calcium and magnesium content is passed through this mineral tank. The hard solution content has a positive charge. Therefore, these content sticks firmly on the beads. Later, brine solution having positive charge not as strong as the calcium and magnesium are passed through these beads. The hard solution contents are removed away from the beads.
Thus, the sodium replaces the calcium and magnesium content in hard fluids. This is how it works.
Do I Need?
First of all, you need to find out whether the solution that is used at your home is hard or not. We have already mentioned the different tests that can be done to check whether the solution is hard or not. Test the solution first.
Later if you find the fluid is hard, it solely depends on you, of buying it or not. After we find that the mixture is hard, the next test should be regarding the level of hardness present in the mixture. It will help you in choosing the right product and according to your suitable need.
We have seen already how the hard fluid can affect and damage our household materials. A lot of money will be wasted in regular repairs of the Household Equipment and, if you buy it will save some money.
Find What Size Softener Do You Need?
In all sense, it has to be admitted that salt-based water softener works much better than the salt-free. So if you are looking for the system which lasts long and is a durable one, go for the salt-based ones.
There are many choices available in the salt-based water softening appliance, choosing the right one is a major task. Below we have considered four parameters on the basis on which you will be able to make a perfect choice!
Calculate the hardness of the water
This parameter is measured in terms of gallons per minute. For hardness, it usually ranges from three to twenty. Three scores being the lowest in the hardness scale. 20 hardness level, means the water is too hard. Using a hardness testing kit, measure the hardness of the water and choose the appropriate softener.
Evaluate the daily or weekly usage of the water at your place
On an average, a normal person uses 80 to 100 gallons in one day. Now take this average value and multiply it by the number of people at your place. For weekly calculation, multiply it by 7 days a week. According to the calculated value, make the choice of the finest water softener.
Calculate the amount of grain that has to be removed in 1 week
Evaluate the approximate number of grains in water. Then simply, calculate the daily usage of the water and then multiply it by the number of hard minerals found.
Choosing the right and best system based on the capacity needed by you
You are provided with different quantity water softeners according to your need. For example, 16000-25000, 33000-41000 etc. So you have to make sure that the number of the grains to be removed in one week does not exceed the total system capacity here.
Softeners Vs. Filtration Systems
Both the filtration and the water softener mechanisms possess different processes. Hard solution softening involves more treatment than just normal filtration process. They are used for removing minerals and other comparatively large elements than found in the filtration system.
They require a bit more complex mechanisms for its working. They remove most of the hard minerals found in solution. The System also neutralizes this solution before actually releasing it. They soften the fluid and should be used when there are chances of damage caused by hard mixture, on the household utensils.
Filtration involves a less complicated process in which the contaminated solution is purified. This process removes water contents like iron, microorganisms and another kind of foul or chlorine smell if present.
Types of Water Softeners
Now people are more aware of the hard solution concept and what all problems it can cause. Different types are now available which serves for appropriate condition. But mainly it is classified into 2 categories:
- Salt Based – This is the same as the one we discussed in the working of a water softener. The brine solution is used, which remove out the calcium and magnesium minerals stuck to the beads of polystyrene. Mostly all the people prefer this type, but there is some controversy regarding the health problems that can occur by this.
The salt traces found in the mixture can damage the people who are already having issues with their kidney. That is why people of some parts of America has stopped the use of a salt-based system. The replacement of the softening material is also not cheap. Regenerating materials with potassium and hydrogen is available in the markets now.
- Salt-Free – In this different technologies are used for softening. Salt is not used here, and the filtering of hard material is done by different machinery handled by separate owners. Some of the types included here are Magnetic, Electronic, and Chelation. Magnetic one uses real magnets to form a magnetic field for filtration. It sends electronic signals to the hard solution particle if any present. And in Chelation, you will find chelate agents which will bind with the hard solution contents for filtration.
The Choice Between Portable and Standard
This answer is very simple. If you want the best system for your home, which is stationary, then you should go for the standard. And for a person who is always moving around from one place to another, the portable one will be the best choice. Though portable in nature, it is easy to handle, they don’t come with all the features present on the standard ones.
The portable doesn’t have the auto-regeneration feature in it. They need comparatively less power than the standard ones. That means, at the end of the day, the amount of the fluid filtered will be significantly less compared with the standard ones. So depending on one’s living style, the finest water softener is to be chosen.
What Kind of Water Softener Do I Need?
This mainly lies on the user’s need. We have tried to list out the necessary things that should be kept in mind before choosing the right water softener for you. Some of the information that you need to figure out are as follows:
- The hardness of the water: This is actually measured in GPG (Grains per Gallon) When the GPG scores between 4-12, the water is considered to be hard. The score of 4 is relatively soft. If the score goes high up to 19, that means the water is very hard in nature. You can test it using a kit or call a professional/plumber to check and tell you.
- Understand the per day or weekly usage of H2O at home: The average solution that is used by a person per day is 70-110 gallons of water. Just multiply this number with the total of persons living in the house.
- Find a number of grains to be removed in one week: Multiply the number of water usage with the number of grains in the same solution.
- Find the right capacity that is suitable for you: This will help in ensuring that the number of grains doesn’t exceed the unit’s capacity.
These points should be kept in mind, which will help in reducing the transformation process too.
We have researched and listed the top 5 brands in the market now. They are :
- Fleck – This one is the oldest brand which has been on the market for almost 52 years now. They have been implementing the latest technology for removal of hard minerals. This is the most recommended one with the best reviews and ratings.
- Waterboss – This one is also been in the market for a long time. This machine particularly focuses on the reduction of fluid wastage. Therefore, this machine uses less solution for softening purpose.
- Morton – One of the oldest salt producing company, which has got good quality water softeners. Some of their systems have received good reviews too.
- Aquasana – This has been in talks lately. This focuses on the environment factor. They use reusable materials and produces minimum waste.
- Culligan – This Reputed producer has been in the market for some 77 years now. They have got a good variety in softening products.
The Price and Size
The cost may vary accordingly. The pricing of such systems depends mainly on size, the functionalities they are providing and also the name of the brand of course.
Considering some issues occurring in this matter, we have classified the right size so that you could easily make a choice among them, for your appropriate need. They are:
- The level of hardness in the solution in your living area (for this consider 4 – 19 GPG)
- The average amount of fluid that is used at home (on an average of 70-110 gallons)
- The capacity you are going to use (in between 20000 to 150000)
Now one more thing to add, if you are going to purchase a smaller product than required, you will go to pay more for the power it consumes during the regeneration process. So consider buying a larger one, even though investment will be a bit more but in the long run it will save you a lot of bucks!
Common Problems & Solutions
We discussed the working of this system and the components and different elements were used in the functionality of it. Some machinery issues have arisen lately regarding the commodity. Most of the companies help the users by providing special assistance for handling the issues of their machine.
However, some of the simple problems arising in the machine could be easily solved by the users itself without wasting much of the money for it. We will check out some of the general issues that may arise while using your finest system.
If suddenly your system has stopped its work, then you can check on the issue by yourself by carrying out the following parameters one by one:
- The bypass valve. Do check this valve in the water softening system, the water enters through this valve in the working unit. Make sure that the valve is open.
- Next, if your machine is running on electricity, make sure that the power has been turned on, and there is the right amount of power supply that is needed for it.
- Do check that there is a sufficient amount of sodium chloride in the brine tank.
- Perform a regeneration cycle manually. On most of the sections of the machine, you will find a lever system in the control area, which helps in performing a manual regeneration process.
Some other major issues which can be handled by the user itself without any technical help include blockages, the breaking of resin beads, salt bridges, user error, and motor failure.
By the continuous passage of the hard mixture containing a high amount of salt and minerals, there are high chances of them getting accumulated on the surface of the pipeline which blocks the passage of the mixture after some time. This can occur on the lining part of the brine tank or the filtering area of it.
This issue can be easily noticed when you find that there is a considerably less amount of water entering in the unit is being softened after the processing. If you find such an issue, you should first check the inside surface of the pipeline for any blockage.
This issue can be easily handled. First of all, close all the water supply that is being passed into this product by either turning off the incoming flow of solution or the bypass valve present. Tap on the pipe to break the solid accumulations inside the pipe surface. Using a scoop like a thing, you can remove the depositions present in it.
The Breaking of Resin Beads
This issue arises only in a salt based system. Good quality and proper usage will keep the beads in good condition for a long time. However, if any problem arises in the beads, it can be known easily. You may find part of the beads inside the softened mixture. Also, if you are doing a frequent recharge of your water softener, check the condition of the beads once and then proceed.
The only solution to this is to clean them properly or completely change them with new beads.
There are high chances of salt depositions on the inside surface of the pipe. This may result in hard form deposition at the lower part of the machine too. One of the reasons may be that the wrong choice of salt is being used, the kind of temperature in which it is working and also the temperature of the water.
The salt bridge causes some kind of gap between the salt and the solution which hinders the process of the regeneration in the machine. So if you find that the water is not being softened in this machine, there are high chances of formation of a salt bridge.
The solution to this problem may require some kind of assistance, still, you can also do it on your own too. You can use some broom-like stick to remove the buildups and remove the crust formed inside the lining of the pipeline. Otherwise, take a professional help if needed.
To get started, you need to do some manual settings on it. Since this work is done manually, any step can go wrong due to the user error. Most of the systems are easy to handle. While some of them many be a little complex for a newbie to understand. To avoid such error, follow the instruction book carefully and perform the task. If anything goes wrong, refer the book for help.
Like all the other working devices, motors play a vital role in the processing of any machine. If the system doesn’t start correctly, then there are high chances that the motor has been damaged because of some reason. In such cases, taking a technical support from the manufacturers is a preferable solution and ask for a motor replacement if required.
Tips of Maintenance to Keeping it Healthy
This system doesn’t require much maintenance. Still, we recommend you to do timely servicing of the machine as and when required. Below are discussed some of the queries that may also arise in your mind regarding the maintenance.
#Tip 1: What is the right time to add salt?
The addition is salt is very important for your machine as it is needed for proper transformation process to take place. If you are still not sure about the quantity of salt that is to be added, some of the factors that may help include:
- The size of the brine tank.
- The hardness property of the fluid in your area.
- The number of people residing at your place.
- The amount of the fluid that is used on average.
So checking out all these points, you may get an idea about the amount of salt to be added.
#Tip 2: What is the amount of salt that is to be added in the brine tank?
Now on an average, the quantity of salt should be a quarter full with the water present in it. The salt level should be such that it is not more 6 inches from the top of the tank opening.
The salt content should be such that it is some part above the water level in the tank. Before you actually add salt, make sure that there are no salt depositions formed at the bottom surface of the tank. If it is there, remove it by adding hot water for hard depositions.
#Tip 3: What quantity of salt is actually required?
For a different system, the amount of salt differs. It mainly depends on the amount of the H2O that is used. On average, residential places use almost 11 pounds of salt in one week.
#Tip 4: How much water should be there inside the brine tank?
There is already some amount of solution inside the brine tank. Generally, it is not more than 11.5 inches in height.
#Tip 5: Some more additional tips –
- Use small salt pellet kind of thing along with the iron remover. The normal salt can be less expensive but in some time, it can cause great damage to your machine. It can also lead to the blockage of the valve and the injector.
- Add salt only when most of the salts have been used up in the tank. During refilling, fill not more than two third of the tank.
- For cleaning the resin bead, you can use the iron-out which is also good for the Water Softener Parts of the control valve. You can use it once in a year for keeping it clean.
- Make it a habit of cleaning the brine tank once in a year.
We have done a thorough study on the water softener solutions present and written it in this Compressive Guide. People less prefer the salt based systems because of the maintenance issue present in it. Nowadays such systems come with much smarter technology that learns many things on their own after you use them for a while. That also means that you need to spend less time in refilling the tank with salt. Now, even if the system used is electronic one or the standard one, the user has benefited always.
We have done a deep study for Best Water Softener Reviews 2020 Our Top Picks so that it simplifies your task in making the optimal choice. Fleck is the best-rated one according to our researches and reviews collected. So what are you waiting for? Choose the right one and have a good softening time! You can find other awesome reviews of different Water Appliances at WaterGadget.com